Installation de TrueCrypt

Installation de TrueCrypt.

1) Création du répertoire de travail :

pi@raspberrypi ~ $ mkdir TRUECRYPT
pi@raspberrypi ~ $ cd TRUECRYPT/
pi@raspberrypi ~/TRUECRYPT $

2) Installation des paquetages de base :

pi@raspberrypi ~/TRUECRYPT $ sudo apt-get install libgtk2.0-dev libfuse-dev nasm libwxgtk2.8-dev

3) Installation de WxWidget :

– Téléchargement :

pi@raspberrypi ~/TRUECRYPT $ wget http://prdownloads.sourceforge.net/wxwindows/wxWidgets-2.8.12.tar.gz
pi@raspberrypi ~/TRUECRYPT $ tar xvfz wxWidgets-2.8.12.tar.gz
pi@raspberrypi ~/TRUECRYPT $ cd wxWidgets-2.8.12

– Configuration :

pi@raspberrypi ~/TRUECRYPT/wxWidgets-2.8.12 $ ./configure

– Compilation :

pi@raspberrypi ~/TRUECRYPT/wxWidgets-2.8.12 $ make
pi@raspberrypi ~/TRUECRYPT/wxWidgets-2.8.12 $ cd ..

4) Installation de Pkcs11 :

pi@raspberrypi ~/TRUECRYPT $ mkdir pkcs11
pi@raspberrypi ~/TRUECRYPT $ cd pkcs11/
pi@raspberrypi ~/TRUECRYPT/pkcs11 $ wget ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v211/pkcs11.h
pi@raspberrypi ~/TRUECRYPT/pkcs11 $ wget ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v211/pkcs11f.h
pi@raspberrypi ~/TRUECRYPT/pkcs11 $ wget ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v211/pkcs11t.h

5) Télécharger TrueCrypt :

Page : http://www.truecrypt.org/downloads2

pi@raspberrypi ~/TRUECRYPT $ links www.truecrypt.org/downloads2
pi@raspberrypi ~/TRUECRYPT $ ls -l
total 1904
-rw-r--r-- 1 pi pi 1949303 juil. 17 19:39 TrueCrypt 7.1a Source.tar.gz
pi@raspberrypi ~/TRUECRYPT $ tar xvfz TrueCrypt\ 7.1a\ Source.tar.gz
pi@raspberrypi ~/TRUECRYPT $ cd truecrypt-7.1a-source/

6) Compilation :

– Configuration :

pi@raspberrypi ~/TRUECRYPT/truecrypt-7.1a-source $ export PKCS11_INC=/home/pi/TRUECRYPT/pkcs11/

– Modification :

Pour éviter l’erreur suivante lors de la compilation :

../Common/SecurityToken.cpp: In member function ‘TrueCrypt::Pkcs11Exception::operator std::string() const’:                                     
../Common/SecurityToken.cpp:660:4: error: ‘CKR_NEW_PIN_MODE’ was not declared in this scope                                                     
../Common/SecurityToken.cpp:661:4: error: ‘CKR_NEXT_OTP’ was not declared in this scope                                                         
../Common/SecurityToken.cpp:662:4: error: ‘CKR_FUNCTION_REJECTED’ was not declared in this scope                                                
make[1]: *** [../Common/SecurityToken.o] Erreur 1                                                                                               
make: *** [all] Erreur 2 

Ouvrir :

Common/SecurityToken.cpp

Chercher :

                        TC_TOKEN_ERR (CKR_NEW_PIN_MODE)
                        TC_TOKEN_ERR (CKR_NEXT_OTP)
                        TC_TOKEN_ERR (CKR_FUNCTION_REJECTED)

Remplacer par :

                        /*TC_TOKEN_ERR (CKR_NEW_PIN_MODE)*/
                        /*TC_TOKEN_ERR (CKR_NEXT_OTP)*/
                        /*TC_TOKEN_ERR (CKR_FUNCTION_REJECTED)*/

– Compilation en prenant en compte la librairie wxWidget :

pi@raspberrypi ~/TRUECRYPT/truecrypt-7.1a-source $ make NOGUI=1 WX_ROOT=/home/pi/TRUECRYPT/wxWidgets-2.8.12 wxbuild

– Compilation de TrueCrypt:

pi@raspberrypi ~/TRUECRYPT/truecrypt-7.1a-source $ make NOGUI=1 WXSTATIC=1

7) Installation :

pi@raspberrypi ~/TRUECRYPT/truecrypt-7.1a-source $ sudo cp Main/truecrypt /usr/local/bin/
pi@raspberrypi ~/TRUECRYPT/truecrypt-7.1a-source $ cd

8) Vérification :

pi@raspberrypi ~ $ truecrypt --version
TrueCrypt 7.1a

8) Liens :

http://www.carrier-lost.org/blog/raspberry-pi-truecrypt-on-raspbian
http://karlherrick.com/dev/2013/01/21/compiling-truecrypt-on-raspberry-pi/

Laisser un commentaire

Votre adresse e-mail ne sera pas publiée. Les champs obligatoires sont indiqués avec *